New Equipment

NEW CA AUTOMATIC TUB LINE THREE PRESS STATIONS WITH MIXING /SCALING AND PRESSING WITH ROBOTIC STACKER 200 LB TUBS EVERY MIN. WITH MIN HOLD TIME

NEW CA AUTOMATIC TUB LINE THREE PRESS STATIONS WITH MIXING /SCALING AND PRESSING WITH R...

Learn More

new Fans

New 36" Paddle Fan

New 36″ Paddle Fan, 10HP to 75HP, Inlet Diameter 21″ OD, Outlet Area 2.41 S...

Learn More

new Fans

New 29" Paddle Fan

New 29″ Paddle Fan, 10HP to 50HP, Inlet Diameter 17″ OD, Outlet Area 1.6 Sq...

Learn More

Hammer Mill Model CA-12

Hammer Mill Model CA-12 -12″ Wide Rotor with Fixed Hammers -Inlet 8-1/4″ x ...

Learn More

7.5 HP 1765 RPM 213T FRAME SIEMENS 230/460 VOLTS NEW

Learn More

new Coolers

CA-2GA Vertical Cooler with Dual Rotary Pocket Discharge

CA-2GA Vertical Cooler with Dual Rotary Pocket Discharge, 1HP Gear Drive, Solido 500 Le...

Learn More

new Magnets

Rare Earth Neodymium-Iron-Boron Magnet 18" Wide

Rare Earth Neodymium-Iron-Boron Magnet 18″ Wide, 1-1/4″ Thick x 9″ L ...

Learn More

Assorted V-Belts

Assorted V-Belts (New and Used)

Learn More

Compression Screw

Compression Screw (Single Flight) # 5000RX-22

Learn More

Cast Stainless Steel Pick Bars for 18" Diameter Conditioner

Cast Stainless Steel Pick Bars for 18″ Diameter Conditioner: Price/Ea

Learn More

new Coolers

2GA Vertical Cooler

New CA – 2GA Vertical Cooler with Dual Rotary Pocket Discharge, 1HP Gear Drive, BMRX-...

Learn More

New CA 30 Feed Cleaner

New CA 30 Feed Cleaner 7.5 HP TEFC Motor Rated up to 30 TPH- Includes Screen of Choice-...

Learn More

Disconnect, 200 AMP, 240V, Westinghouse

Learn More

Disconnect, 100 AMP, 240V, Cutler-Hammer

Learn More

Hammer Mill Model CA-19313

Hammer Mill Model CA-19313 -HP Range of 25-60HP

Learn More

Disconnect, 100 AMP, 240V, Sylvania, NEMA 1 Indoor

Learn More

new Dies

21V Cube Die

21V Cube Die, 6.25″ Wide x 4″ Pad, 2-3/4″ Thick with 1/4″ Relie...

Learn More

new Cyclone

New Cyclone 96" Diameter

New Cyclone 96″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

new Coolers

2GA2 Vertical Pellet Cooler

2GA2 Vertical Pellet Cooler -Dual Rotary Pocket Wheel Discharge with 1HP Gear Drive and...

Learn More

Sample Collector with Stand

Sample Collector with Stand, to Allow for Ease of Sample Procurement After Test -Please...

Learn More

new Pumps

GORMAN RUPP PUMP MODEL 276B-98 SELF -PRIMING CENTRIFUGAL PUMP WATER 2 HP 3500 RPM 1 PH NEW

GORMAN RUPP PUMP MODEL 276B-98 SELF -PRIMING CENTRIFUGAL PUMP WATER 2 HP 3500 RPM 1 PH ...

Learn More

Assorted V-Belts

Assorted V-Belts (New and Used)

Learn More

new Cyclone

New Cyclone 60" Diameter

New Cyclone 60″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Compression Chamber Assembly

Compression Chamber Assembly # 5000-08T

Learn More

CA 12" Wide Belt x 9' Long Sewing Conveyor

CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive, Variable Speed...

Learn More

new

New CA 100 Feed Cleaner

New CA 100 Feed Cleaner 25 HP TEFC Motor Rated up to 100 TPH Includes Screen of Choice-...

Learn More

new Extruders

Conex 5000

Conex 5000, 3 Head Extruder Set Up for Soy Beans with 1HP Side Hopper Feeder Requires 7...

Learn More

new High Speed Blender

New CA High Speed Blender 16" Diameter X 5' Long with 20 HP Motor. Picks and Cleanout Door

New CA High Speed Blender 16″ Diameter X 5′ Long with 20 HP Motor. Picks an...

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

Disconnect, 200 AMP, 240V, Westinghouse, JHFN 324

Learn More

22" x 22" Fike Explosion Vent

22″ x 22″ Fike Explosion Vent Model CV-S 1.5 PSTAT with Frame

Learn More

Disconnect, 200 AMP, 240V, Westinghouse

Learn More

new Extruders

Conex 5500, 4 Head Extruder

Conex 5500, 4 Head Extruder Set Up for Soy Bean-Top Feeder, Requires 125HP Motor-Not In...

Learn More

Force Feeder for Century Pellet Mill

Force Feeder for Century Pellet Mill, Will Need Exact Dimensions From Discharge of Cond...

Learn More

new Magnets

Rare Earth Neodymium-Iron-Boron Magnet 12" Wide

Rare Earth Neodymium-Iron-Boron Magnet 12″ Wide, 1-1/4″ Thick x 9″ L ...

Learn More

2 Compartment Pellet Durability Index Tester, K-State Design

2 Compartment Pellet Durability Index Tester, K-State Design with 1/6HP Gearmotor, 1PH,...

Learn More

CA30/730/530 # 0187100 Feed Screw Asssembly

Learn More

new Extruders

304 SS Preconditioner

304 SS Preconditioner: -12″ x 6′ with 3HP Drive -Fabricated 304SS Picks -So...

Learn More

new Cyclone

New Cyclone 54" Diameter

New Cyclone 54″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

KICE DIVERTER 4" TWO WAY NEW 2018 MODEL 68Q4

KICE DIVERTER 4″ TWO WAY NEW 2018 MODEL 68Q4

Learn More

CA 12" Wide Belt x 9' Long Sewing Conveyor

CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive Variable Speed,...

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

New 80 Cubic Ft Bagging Bin

Learn More

5HP 1170 RPM 575 Volt

5HP 1170 RPM 575 Volt, 3 Phase, Teco-Westing House

Learn More

new Magnets

Stainless Steel 16" x 7' x 2" Thick Plate Magnet

Stainless Steel 16″ x 7″ x 2″ Thick Plate Magnet

Learn More

new Fans

New Conex 29″ Paddle Fan

Model 294LS 10 HP to 50 HP

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Brass 8" Test Sieve

Brass 8″ Test Sieve, NO. 3-1/2 with Brass Bottom Pan Other Mesh Size Available Up...

Learn More

CA 12" Wide Belt x 9' Long Sewing Conveyor

CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive, Variable Speed...

Learn More

new Magnets

Magnet Rotary Bar Magnet Brand Eriez 12" Wide

Magnet Rotary Bar Magnet Brand Eriez 12″ Wide with 1/3HP Gearmotor

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

CA 12" Wide Belt x 9' Long Sewing Conveyor

CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive, Variable Speed...

Learn More

new Coolers

2GA Vertical Pellet Cooler

2GA Vertical Pellet Cooler -Dual Rotary Pocket Wheel Discharge with 1HP Gear Drive and ...

Learn More

CA30/730/530 Brush Hub Assembly

Learn More

5.5"X5.5" AIRLOCK DROP THRU 3/4 HP

5.5″X5.5″ AIRLOCK DROP THRU 3/4 HP

Learn More

new Con Ag Belt Dryer

5X20 Single Pass Pet Food Dryer 2 TPH Capacity, Natural Gas 3M BTU

Learn More

Century Quick Dump Bypass Chute, Stainless Steel

Century Quick Dump Bypass Chute, Stainless Steel Construction

Learn More

new Extruders

Goyum 150 Expeller Press

Goyum 150 Expeller Press without Stack Cooker: -Capacity: 15-20 Tons Per Day -30HP, 3 P...

Learn More

KICE AIR PUMP MODEL PD 4000 NEW

Learn More

Assorted V-Belts

Assorted V-Belts (New and Used)

Learn More

4 Compartment Pellet Durability Tester, K-State Design

4 Compartment Pellet Durability Tester, K-State Design with 1/6HP Gearmotor, 1PH, with ...

Learn More

New Brush Hub Assembly for CA30

Learn More

new Cyclone

New Cyclone 36" Diameter

New Cyclone 36″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

new Cyclone

New Cyclone 84" Diameter

New Cyclone 84″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

Century Bull Gear and Pinion, 21 Tooth and 144 Tooth x 6.5" Wide

Century Bull Gear and Pinion, 21 Tooth and 144 Tooth x 6.5″ Wide

Learn More

Custom Built Cage for Pellet Tester

Custom Built Cage for Pellet Tester, Metal Sides, Back and Top with Plexiglass, Hinged ...

Learn More

NEW CA AUTOMATIC TUB LINE PLANT 100 TO 200 LB. TUBS AUTOMATIC CONTROLS WITH A MANUAL PALLET LOADING SINGLE LINE ONE TUB/ 3 MINS.

NEW CA AUTOMATIC TUB LINE PLANT 100 TO 200 LB. TUBS AUTOMATIC CONTROLS WITH A MANUAL PA...

Learn More

2 Compartment Pellet Durability Index Tester, K-State Design

2 Compartment Pellet Durability Index Tester, K-State Design: -1/6HP Gearmotor, 1 PH, 6...

Learn More

new Magnets

Stainless Steel 10" x 7" x 2" Thick Plate Magnet

Stainless Steel 10″ x 7″ x 2″ Thick Plate Magnet, QTY: 12

Learn More

new Coolers

Geelen Counter Flow Cooler

Geelen Counter Flow Cooler, 30 Tons Type VK 28 x 38KL, 10’4″ Wide x 14̵...

Learn More

New Center Section for CPM 101 Whirley

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Feeder and Conditioner for Century Pellet Mill with Drives and Motors

Feeder and Conditioner for Century Pellet Mill with Drives and Motors, Includes Ceramic...

Learn More

new Shakers/Screeners

5 x 10 Single Deck Shaker

5 x 10 Single Deck Shaker, Parts Interchange with Rotex 81 Series

Learn More

CA 12" Wide Belt x 9' Long Sewing Conveyor

CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive Variable Speed,...

Learn More

Shaft for Century Conditioner

Shaft for Century Conditioner, Cast Stainless Steel Adjustable Picks, Stainless Steel S...

Learn More

CA 730 FEED CLEANER WITH 7.5 HP MOTOR RATED UP TO 30 TONS /HR.

Learn More

new Cyclone

New Cyclone 30" Diameter

New Cyclone 30″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood ...

Learn More

Century Heavy Duty Mainshaft

Learn More

new Coolers

Outside Louver Panel for 2GA2 Cooler

Outside Louver Panel for 2GA2- Mild Steel- Bolt on Style

Learn More

new Extruders

PLC Based Control Panel

Upgrade to PLC Based Control Panel Features: -Auto Feeder Control Based on Main Ampload...

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Drive Shaft Assembly

Drive Shaft Assembly (5 Head) # 5500-30

Learn More

new Coolers

Stainless Steel Mesh Screen Material for 2GA Cooler

Stainless Steel Mesh Screen Material for 2GA Style Vertical Cooler, Coverage for One Pa...

Learn More

5,000 Lb NTEP 4' x 4' Platform Scale with Digital Indicator

5,000 Lb NTEP 4′ x 4′ Platform Scale with Digital Indicator -Option 1: Ther...

Learn More

Inner Bearing Retainer

Inner Bearing Retainer # 5500-10

Learn More

1HP 3450 RPM Frame 56J 115/230 Volts

1HP 3450 RPM Frame 56J 115/230 Volts, 1 Phase, World Wide

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Century Shear Pin Assembly

Learn More

Bulk Bag Unloader

Bulk Bag Unloader: -3″ Tubular Steel Framework -2 Ton Hoist -Cantilever Rail Syst...

Learn More

Drive Shaft

Drive Shaft (5 Head) # 5500-13M

Learn More

Procedure: Grind Front of Gear Box and Fabricate New Stainless Steel Wear Ring to Protect Against Future Wear

Procedure: Grind Front of Gear Box, Epoxy Front Plate with Devcon and Fabricate New Sta...

Learn More

Front Bearing

Front Bearing # 5500-24

Learn More

1HP NAE 1800RPM Frame 143T 208-230/460 Volts

Learn More

new Belt Dryers and Grain Dryers

Belt Feeder/Spreader for 58" Wide Tray

Belt Feeder/Spreader for 58″ Wide Tray Includes: -Stand up to 72″ High (Cus...

Learn More

100HP NAE 3600RPM Frame 405T 460 Volts

Learn More

1HP NAE 1760RPM Frame 56C 208-230/460 Volts

Learn More

new Magnets

12" x 7" x 32 MM Rare Earth Plate Magnet

12″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body

Learn More

Wearspace Washer

Learn More

new Fans

New 19-1/8" Paddle Fan

New 19-1/8″ Paddle Fan, 2HP to 25HP, Inlet Diameter 11″ OD, Outlet Area 0.6...

Learn More

350HP NAE 3600RPM Frame 586/7U 460 Volts

Learn More

new Cyclone

New Cyclone 72" Diameter

New Cyclone 72″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

Nose Cone

Nose Cone (Right or Left) 3/4″ # 5500-60C

Learn More

Rear Bearing Assembly

Rear Bearing Assembly for Model 5000

Learn More

Rear Seal

Rear Seal for Model 5000

Learn More

Front Plate Assembly

Front Plate Assembly # 5500-28

Learn More

Front Seal

Front Seal # 5000R-25

Learn More

new Coolers

Estimated Time to Build Cooler

Estimated Time to Mock Up Placement, Test Fit, Fabricate Transition -Actual Time and Ma...

Learn More

Shaft for CPM Century Conditioner with Stainless Steel Adjustable Picks

Shaft for CPM Century Conditioner with Stainless Steel Adjustable Picks, Heavy Wall Sta...

Learn More

Digital AMP Meter

Digital AMP Meter with 3.62″ X 1.77″ Display 120V

Learn More

Outer Bearing Retainer Ring

Outer Bearing Retainer Ring for Model 5500

Learn More

Speedisleeve

Speedisleevefor Model 5500

Learn More

Steamlock

Steamlock 5-1/8″

Learn More

new Conveyors

Hytrol Roller Conveyor

Hytrol Roller Conveyor 10″ x 10′ 7 Sections

Learn More

new Magnets

16" x 7" x 32 MM Rare Earth Plate Magnet

16″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body

Learn More

Steamlock Key

Learn More

Plug Part

Learn More

Front Bearing Assembly

Front Bearing Assembly # 5000R-23

Learn More

75HP NAE 1800RPM Frame 365T 208-230/460 Volts

Learn More

GREAT WESTERN TRU-BALANCE SIFTER TB MODEL 711M/6 6 DECKS 34X34

Learn More

4/8V 40.0 Belt Sheave

4/8V 40.0 Belt Sheave # 5000-03

Learn More

Compression Screw

Compression Screw (Double Flight) # 5000-22

Learn More

Hex Bolt

Hex Bolt 5/8-11 X 1-1/2 HCS

Learn More

100HP NAE 1800RPM Frame 405T 208-230/460 Volts

Learn More

new Coolers

Custom Stand for Vertical Cooler

Custom Stand for Vertical Cooler, Allows for Clearance to Place Shaker Underneath

Learn More

Nose Cone

Nose Cone (Right or Left) 5/8″ # 5500-60A

Learn More

Thermometer

Learn More

Steamlock Ring

Learn More

new Cyclone

New 17" x 10' Ductwork

New 17″ x 10′ Ductwork 12GA Carbon Steel

Learn More

Rotor for Jacobson/Carter Day P-241 Hammer Mill

Learn More

new Extruders

INSTA -PRO MODEL 9400 EXTRUDER RECONDITIONED 6000TO 8000 LBS. /HR. SOYBEANS WITH 350 HP MAIN MOTOR SIDE FEEDER 133"X130"X72" TALL 16,480 LBS.

INSTA -PRO MODEL 9400 EXTRUDER RECONDITIONED 6000TO 8000 LBS. /HR. SOYBEANS WITH 350 HP...

Learn More

Century Roll Shell Bearing Lock Washer Part

Learn More

Sight Glass and Vent Plug Kit

Sight Glass and Vent Plug Kit for Model 5500

Learn More

20HP NAE 1800RPM Frame 256T 208-230/460 Volts

Learn More

new Cyclone

New 17" Diameter Ductwork 90 Degree Elbow

New 17″ Diameter Ductwork 90 Degree Elbow 12GA Carbon Steel

Learn More

Inlet Screw

Inlet Screw (Single Flight) # 5000RX-09

Learn More

30HP NAE 1800RPM Frame 286T 208-230/460 Volts

Learn More

Inlet Chamber Mounting Bolt

Inlet Chamber Mounting Bolt with Lock Washer # 5000-K

Learn More

20HP New NAE 3520RPM Frame 256T

Learn More

Set of Timken Main Bearings for SW 501H

Set of Timken Main Bearings for SW 501H Includes: -Two Bearing Cup -Two Bearing Cone -T...

Learn More

Retainer Part (2-3/8")

Retainer Part (2-3/8″) for Model 5500

Learn More

300HP NAE 1800RPM Frame 449TS 460 Volts

Learn More

CA30/730/530 Rear Bearing with Seal

Learn More

Front Seal

Front Seal # 5500-25

Learn More

Left Hand Tap

Learn More

Fully Machined Round Stainless Shaft with Milled Flats to Accept Pick Bars

Fully Machined Round Stainless Shaft with Milled Flats to Accept Pick Bars -Shaft OAL A...

Learn More

1.5HP NAE 1800RPM Frame 145T 208-230/460 Volts

Learn More

new Coolers

Pocket Discharge Paddle Wheel for 2GA-2GA4 Style Cooler

Pocket Discharge Paddle Wheel for 2GA-2GA4 Style Cooler, 2 Unites Required Per Cooler w...

Learn More

Disconnect, 100 AMP, 240V, I-T-E, Type 1 Indoor, Siemens

Learn More

8V1700 (Drive V Belt)

8V1700 (Drive V Belt) #5500-05

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

Set of Seals and Bearings for Century Pellet Mill

Learn More

new Coolers

Mild Steel Paddle Assembly for 2GA-2GA4 Cooler

Mild Steel Paddle Assembly for 2GA-2GA4 Cooler, 2 Required Per Unit, if Stainless Steel...

Learn More

49" x 90" Storveyor Stainless Steel Conveyor

49″ x 90″ Storveyor Stainless Steel Conveyor with Twin Pile Breakers and Di...

Learn More

250HP NAE 1800RPM Frame 449TS 460 Volts

Learn More

Nose Bullet

Nose Bullet 7/8″ or 1″ # 5000-63

Learn More

Rear Bearing

Rear Bearing for Model 5500

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

Square Plug

Learn More

New Feeder Bin with 14" Auger

New Feeder Bin with 14″ Auger

Learn More

new Ribbon Mixers

New Hayes & Stolz Ribbon Only

New Hayes & Stolz Ribbon Only for Model HRDB 465-0499

Learn More

new Coolers

Inside Screen Panel for 2GA2 Cooler

Inside Screen Panel for 2GA2 Cooler, Stainless Steel, Bolt on Style with Stainless Mesh...

Learn More

Feeder and Conditioner For 3022 18" x 104"

Feeder and Conditioner For 3022 18″ x 104″, C/W Die Hoist -2 Liquid Additio...

Learn More

Century Roll Shell-Closed End Corrugated

Century Roll Shell-Closed End Corrugated, Shell Only Not Assembly, Price/Ea.-2 Required...

Learn More

new Cyclone

New 21" x 10' Ductwork

New 21″ x 10′ Ductwork 12GA Carbon Steel

Learn More

new Cyclone

New Cyclone 42" Diameter

New Cyclone 42″ Diameter 12GA Mild Steel Left or Right Hand

Learn More

Lock Washer

Lock Washer # 5500-16

Learn More

new Belt Conveyors

20" x 12'5" Belt Conveyor

20″ x 12’5″ Belt Conveyor

Learn More

1/2HP NAE 1800RPM Frame 56C 208-230/460 Volts

Learn More

Compression Fitting

Learn More

Rear Plate

Rear Plate for Model 5500

Learn More

1/3 HP 1750 RPM 230/460 VOLTS FRAME 56C NEW NORTH AMERICAN

Learn More

CPM 7000 Bull Gear 137 Tooth (5-1424-21)

Learn More

1/2 HP 1725 RPM FRAME S56C 230/460 VOLTS PH. 3

Learn More

Century Roller Front Support Plate Part

Learn More

Nose Cone Locking Plug

Nose Cone Locking Plug # 5000-61M

Learn More

new Coolers

Control Panel for Vertical Cooler

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Lock Nut

Lock Nut # 5500-15

Learn More

10,000 Lb NTEP 4' x 4' Platform Scale with Digital Indicator

10,000 Lb NTEP 4′ x 4′ Platform Scale with Digital Indicator -Option 1: The...

Learn More

Century Pinion Bearing Housing

Learn More

Rear Seal

Rear Seal for Model 5500

Learn More

Thrust Bearing with Cup

Thrust Bearing with Cup for Model 5500

Learn More

new Magnets

Stainless Steel 20" x 7" x 2" Thick Plate Magnet

Stainless Steel 20″ x 7″ x 2″ Thick Plate Magnet

Learn More

7830 Bull Gear

Learn More

Front Lock Washer

Learn More

Rear Lock Washer

Learn More

40HP NAE 1800RPM Frame 324T 208-230/460 Volts

Learn More

new Extruders

Conex 5500, 5 Head Extruder

Conex 5500, 5 Head Extruder Setup for Petfood/Aquaculture, Requires 125HP Motor-Not Inc...

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Steamlock

Steamlock 5-3/8″

Learn More

new Extruders

6' Diameter x 12' Long Tumble Cooler

6′ Diameter x 12′ Long Tumble Cooler: -Mild Steel Construction -Bolt on Fli...

Learn More

Union Special Portable Sewing Machine

Union Special Portable Sewing Machine, Model 4000B, 110 Volt

Learn More

Century Roll Shell Seal

Century Roll Shell Seal, Seal Only, Price/Ea-2 Required Per Assembly, 4 Per Mill

Learn More

60HP NAE 1800RPM Frame 364T 208-230/460 Volts Explosion Proof

Learn More

Horizon Gardner Denver 3600 RPM

Learn More

75HP Soft Starter Package - NEMA 4/12 - Circuit Breaker Disconnect Door Mounted Keypad HOA, and By-Pass Elector Switch Integral Start Duty By-Pass

75HP Soft Starter Package – NEMA 4/12 – Circuit Breaker Disconnect Door Mou...

Learn More

75HP NAE 1200RPM Frame 405T 208-230/460 Volts

Learn More

30HP NAE 3600RPM Frame 286TS 208-230/460 Volts Explosion Proof

Learn More

new Extruders

Control Panel for Extruder

Control Panel for Extruder, Includes Start-Stop Contractor for 125HP Main Motor, Start-...

Learn More

new Magnets

Stainless Steel 12" x 7" x 2" Thick Plate Magnet

Stainless Steel 12″ x 7″ x 2″ Thick Plate Magnet

Learn More

new Extruders

Conex 30" Diameter 304SS Hopper Tank

Conex 30″ Diameter 304SS Hopper Tank: -Feeder: 5″ 304SS Feed Screw with 3HP...

Learn More

Inlet Chamber Assembly

Inlet Chamber Assembly (Diverter Adapter) # 5500-10RTT-M

Learn More

Adjusting Wrench

Adjusting Wrench (Nose Cone) # 5000R-67A

Learn More

Century Knife Post with Key

Century Knife Post with Key, Does Not Include Heat Treated Knife

Learn More

25HP NAE 1800RPM Frame 284T 208-230/460 Volts

Learn More

Century Feed Cone Bolt Assembly

Century Feed Cone Bolt Assembly, 6 Required Per Mill

Learn More

Nose Cone

Nose Cone (Right or Left) 3/8″ # 5500-60

Learn More

new Food Grade Equipment

BRAY VALVE 8"

BRAY VALVE 8″

Learn More

Hammer Mill Model CA-160

Hammer Mill Model CA-160 -HP Range of 5-15HP -Available with 1800 or 3600 RPM Motor &nb...

Learn More

Century Roll Shell Assembly-Closed End Corrugated

Century Roll Shell Assembly-Closed End Corrugated, Price/Ea- 2 Required Per Mill

Learn More

Rotor for Jacobson/Carter Day P-240 Hammer Mill

Learn More

Century Door Gasket

Learn More

new Cooler Trays

Replacement Cooler Trays

Replacement Cooler Trays 304 Stainless Steel Construction for CPM Cooler, 1/8 Hole, 46%...

Learn More

new Cyclone

Stand for Cyclone with Integral Fan Mount

Stand for Cyclone with Integral Fan Mount -Mild Steel Const. -Mount Cyclone and Fan -Tr...

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

Seal Shield

Learn More

new Extruder Cutter Head

Cutter Head with Drive Assembly

Cutter Head with Drive Assembly: -2HP Motor Drive with Stand Drive Shaft with Quick D...

Learn More

new High Speed Blender

CA High Speed Blender 16" Diameter x 5' Long

CA High Speed Blender 16″ Diameter x 5′ Long with Picks, Clean Out Door, an...

Learn More

new Roller Mills

DENVER ROLLER MILL MODEL 9X36 TWO PAIR HIGH

Learn More

Matcon Smart Drum Stainless Steel with Controls

Matcon Smart Drum Stainless Steel with Controls with Bulk Discharge Center for Powders

Learn More

new Belt Dryers and Grain Dryers

Belt Feeder/Spreader for 58" Wide Tray

Belt Feeder/Spreader for 58″ Wide Tray Includes: -Stand up to 72″ High -Art...

Learn More

Century HD Wiper

Learn More

Ring and Cover Plate

Ring and Cover Plate for Side Feed Inlet

Learn More

new Coolers

Stainless Steel Outside Louver Panel for 2GA2 Cooler

Stainless Steel Outside Louver Panel for 2GA2 Cooler, 304 Stainless Steel, Bolt on Style

Learn More

400HP NAE 1800RPM Frame 586/7U 460 Volts

Learn More

new Extruders

Airlift System for Conex 5500 Extruder

Airlift System for Conex 5500 Extruder -36″ 304SS Cyclone -304SS Fan with Motor -...

Learn More

Century Knife

Century Knife, Heat Treated

Learn More

Locator Socket Head Cap Screw

Learn More

F 2-3/8" Bore Bushing

F 2-3/8″ Bore Bushing # 5500-07

Learn More

Screw Key

Screw Key for Model 5000

Learn More

2 HP 1725 RPM FRAME 56C 230/460 VOLTS POWER TECH NEW

Learn More

15HP NAE 1800RPM Frame 254T 208-230/460 Volts

Learn More

Diverter Part

Diverter Part # 5500-202

Learn More

5" Thermocoupler

5″ Thermocoupler

Learn More

new Magnets

14" x 7" x 32 MM Rare Earth Plate Magnet

14″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body

Learn More

new Magnets

8" x 7" x 32 MM Rare Earth Plate Magnet

8″ x 7″ x 32 MM Rare Earth Plate Magnet

Learn More

15HP NAE 3600RPM Frame 254T 208-230/460 Volts Explosion Proof

Learn More

Wearspace Set Screw

Learn More

new Extruders

Expeller Press

Expeller Press: -Capacity: 1.5 MT/Hr, -Shafts of AISI 4340 Material -All Worms Hard Chr...

Learn More

Rear Lock Nut

Learn More

new Packing Machinery

NEW PALLET WRAPPER WITH A 48" TURNTABLE AND MANUAL CONTROLS

NEW PALLET WRAPPER WITH A 48″ TURNTABLE AND MANUAL CONTROLS

Learn More

M 3-3/16" Bore Bushing

M 3-3/16″ Bore Bushing #5500-04

Learn More

Bolt Package

Bolt Package (Clamp) # 5500-500

Learn More

5HP Toshiba 1735RPM Frame 184T 460 Volts

Learn More

1HP NAE 1760RPM Frame 143TC Explosion Proof

Learn More

Century Die Clamp Assembly with Bolts and Hardware

Learn More

Century Quill Shaft Only

Century Quill Shaft Only (Not Assembly)

Learn More

Bearing Housing Assembly

Bearing Housing Assembly for 5500 #5500-27

Learn More

Century Shear Pin

Learn More

Steamlock

Steamlock 5-1/2″

Learn More

Compression Chamber Clamp

Compression Chamber Clamp (2pc) # 5000-21

Learn More

World Wide Gearbox

World Wide Gearbox HDR 262-30 to 1 56 C up to 1.5 HP

Learn More

new Shakers/Screeners

#41 AAL/MS Screener 40 x 120

#41 AAL/MS Screener 40 x 120, 1 Deck, with 39 x 119 Screen on Top Includes: -Any Standa...

Learn More

Retaining Key Part

Learn More

7.5HP NAE 1800RPM Frame 213T 208-230/460 Volts

Learn More

Inlet Adapter

Inlet Adapter # 5500-201

Learn More

Nose Bullet

Nose Bullet # 5000-63

Learn More

Thrust Bearing Retainer

Thrust Bearing Retainer for Model 5500

Learn More

150HP NAE 1200RPM Frame 447T 460 Volts

Learn More

50HP NAE 1200RPM Frame 365T 208-230/460 Volts

Learn More

250HP NAE 3600RPM Frame 449TS 460 Volts

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

CA30/730/530 Front Bearing with Seal

Learn More

New Surge Hopper-Mild Steel-6' x 6' with 45 Degree Hopper-Mates to Pellet Mill Feeder

New Surge Hopper-Mild Steel-6′ x 6′ with 45 Degree Hopper-Mates to Pellet M...

Learn More

7.5HP 1755 RPM Frame 213T

7.5HP 1755 RPM Frame 213T, Teco

Learn More

Front Lock Nut

Front Lock Nut # 5000R-54

Learn More

new Fans

New 26" Paddle Fan

New 26″ Paddle Fan, 3Hp to 40Hp, Inlet Diameter 15″ OD, Outlet Area 1.24 Sq...

Learn More

Front Gasket

Front Gasket # 5500R-60

Learn More

new Extruders

EXTRU-TECH CIRCULAR BIN FEEDER MODEL 60X96

Learn More

150HP NAE 900RPM Frame 449T 460 Volts

Learn More

new Fans

30" Diameter Fan Rotor (Impeller with Shaft)

30″ Diameter Fan Rotor (Impeller with Shaft) with Six Blades and 2-7/16″ Sh...

Learn More

Drive Shaft

Drive Shaft (3Head) # 5000R-10

Learn More

Century Feed Cone

Century Feed Cone, Requires 6 Bolt Assembly, Not Included

Learn More

50HP NAE 1800RPM Frame 326T 208-230/460 Volts

Learn More

Drive Shaft

Drive Shaft (4 Head) # 5500-13

Learn More

new Paddle Mixers

New CA High Speed Molasses Mixer

New CA High Speed Molasses Mixer 16″ x 5′ with Picks and Cleanout Door

Learn More

100HP NAE 900RPM Frame 445T 208-230/460 Volts

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

New Brush for CA30

Learn More

TLV Cospect Model COS16 3/4"

TLV Cospect Model COS16 3/4″ Three-In-One Pressure Regulator, Separator, and St...

Learn More

new Magnets

Stainless Steel 14" x 7" x 2" Thick Plate Magnet

Stainless Steel 14″ x 7″ x 2″ Thick Plate Magnet, QTY: 1

Learn More

Super Steamlock

Learn More

Wearsleeve

Learn More

Retainer Part

Retainer Part for Model 5500

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Mount Motor On Century Pellet Mill

Mount Motor On Century Pellet Mill Includes: -Paraflex PX140 Coupling with Element -Lab...

Learn More

new Extruders

Conex 5500, 5 Head Extruder

Conex 5500, 5 Head Extruder, Soybean Feeder, Requires 125HP Motor-Not Included -4 Groov...

Learn More

new Cyclone

New Cyclone 48" Diameter

New Cyclone 48″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...

Learn More

GWM-GG Wolverine Gross Weigh Mechanical Bagging Scale

GWM-GG Wolverine Gross Weigh Mechanical Bagging Scale -Mild Steel Construction with Cam...

Learn More

125HP NAE 3600RPM Frame 444TS 460 Volts

Learn More

Century Deflector Wiper

Century Deflector Wiper, Part#5-1263-04

Learn More

4/8V 12.5 Belt Sheave

4/8V 12.5 Belt Sheave # 5000-06

Learn More

Century Roll Shell Lock Nut Inner Part

Learn More

20HP NAE 1200RPM Frame 286T 208-230/460 Volts

Learn More

125HP NAE 1800RPM Frame 444T 460 Volts

Learn More

new Coolers

Add-On For Linear Actuator Discharge

Add-On For Linear Actuator Discharge, Allows for Infinitely Adjustable Opening Size -Gi...

Learn More

new

Drive Shaft Assembly

Drive Shaft Assembly (4 Head-RC) #5000R-11/5000R-89B

Learn More

Century Roller Adjusting Screw

Century Roller Adjusting Screw -4 Required Per Mill

Learn More

Adjusting Wrench

Learn More

Century Roll Shell Bearing Lock Nut Part

Learn More

Nose Cap

Nose Cap (Right or Left) # 5000R-65

Learn More

30HP Newman 1200RPM Frame 365U

Learn More

Brass Water Injector

Brass Water Injector for Model 5000

Learn More

new Fans

New 15-5/8" Paddle Fan

New 15-5/8″ Paddle Fan, 1HP to 10HP, Inlet Diameter 9″OD, Outlet Area 0.5 S...

Learn More

Century Heavy Duty Mainshaft Disc

Century Heavy Duty Mainshaft Disc, Disc Only Mainshaft Not Included

Learn More

new Belt Dryers and Grain Dryers

Stainless Steel Dryer Pans 5' Wide x 6" Pitch

Stainless Steel Dryer Pans 5′ Wide x 6″ Pitch 5/32 Hole 46% Open

Learn More

Bearing Spacer

Bearing Spacer for 5500 # 5500-08

Learn More

200HP NAE 1800RPM Frame 447T 460 Volts

Learn More

new Extruders

Goyum 150 Expeller Press with Stack Cooker

Goyum 150 Expeller Press with Stack Cooker, Capacity: 15-20 Tons Per Day

Learn More

new Magnets

10" x 7" x 32 MM Rare Earth Plate Magnet

10″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body

Learn More

Set of Roll Shell Bearings for 501-H Price/Ea Roller

Set of Roll Shell Bearings for 501-H Price/Ea Roller: 2 x Timken 749, 2 x Timken 742

Learn More

new Screw Conveyors

World Wide Gearbox

World Wide Gearbox HDRF 06-30/1 R-56C

Learn More

new Dies

1/4" x 3 x 1-7/8" Effective 21V

1/4″ x 3 x 1-7/8″ Effective 21V with Tapered Relief for Tapered Wear Rings,...

Learn More

300HP NAE 3600RPM Frame 449TS 460 Volts

Learn More

Drive Shaft Assembly

Drive Shaft Assembly (4 Head) # 5500-29

Learn More

new Coolers

Product Discharge Unit for Bottom of 2GA-2GA4 Coolers

Product Discharge Unit for Bottom of 2GA-2GA4 Coolers Complete with: -Dual Rotary Pocke...

Learn More

new Bins/Mild Steel Tanks and Stainless Steel Tanks

Mainshaft for Century

Learn More

new High Speed Blender

High Speed Blender 16" Diameter x 5' Long

High Speed Blender 16″ Diameter x 5′ Long with 20HP Motor Picks and Cleanou...

Learn More

Matcon Smart Drum Stainless Steel Tank 28" Diameter x 40" Tall

Matcon Smart Drum Stainless Steel Tank 28″ Diameter x 40″ Tall, Tank Only

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Cardinal Load Cells Model AG18K-4AGBAR Scale Kit

Cardinal Load Cells Model AG18K-4AGBAR Scale Kit, 72,000 Lbs/Hr, Cap for 4 Cells with W...

Learn More

3 HP 1800 RPM FRAME 182TC VOLTS 230/460 NORTH AMERICAN

Learn More

new Coolers

Custom Stand for 2GA2 Cooler

Custom Stand for 2GA2 Cooler, Allows for Clearance to Place Shaker Underneath, Standard...

Learn More

Inlet Chamber Assembly

Inlet Chamber Assembly # 5000-10RTT

Learn More

5HP NAE 1800RPM Frame 184T 208-230/460 Volts

Learn More

30HP NAE 1200RPM Frame 326T 208-230/460 Volts

Learn More

Nose Cone

Nose Cone (Right or Left) 5/16″ # 5000-60B

Learn More

new Scales and Baggers/Sew Machines and Heat Sealers

Stainless Steel Dual Drive Feeder with Conditioner

Stainless Steel Dual Drive Feeder with Conditioner with Integral Steam Manifold, with M...

Learn More

CA Sewing Machine Pedestal with 1/2HP, 1 PH Motor/Micro Switch Control

Learn More

60HP NAE 1800RPM Frame 364T 208-230/460 Volts

Learn More

new Dies

Sprout Waldron 32" Wood Die

Sprout Waldron 32″ Wood Die, 108N Chrome Die, 1/4″ x 3 x 1-1/8″ TRVR,...

Learn More

new Magnets

Stainless Steel 8" x 7" x 2" Wide Plate Magnet

Stainless Steel 8″ x 7″ x 2″ Wide Plate Magnet

Learn More

new Packing Machinery

NEW PALLET WRAPPER WITH 48" TURNTABLE AND MANUAL CONTROLS 1 PH MOTORS

NEW PALLET WRAPPER WITH 48″ TURNTABLE AND MANUAL CONTROLS 1 PH MOTORS

Learn More

CA30/730/530 Shaft

Learn More

Century Door, Mild Steel Construction with Stainless Liner

Century Door, Mild Steel Construction with Stainless Liner: -2 Knife Posts with HD Spri...

Learn More

Bypass Quick Dump Feed Chute for Century Pellet Mill

Learn More

Inlet Chamber Assembly

Inlet Chamber Assembly (Side Feed-L.H./R.H.) # 5500-10RTT-SF

Learn More

Rear Gasket

Rear Gasket for Model 5500

Learn More

new Magnets

Rare Earth Neodymium-Iron-Boron Magnet 16" Wide

Rare Earth Neodymium-Iron-Boron Magnet 16″ Wide, 1-1/4″ Thick x 9″ L ...

Learn More

1HP 1725RPM Frame 56C 230/460 Volts

Learn More