- Home
- Products
New Equipment
Filter
No results found.
Contact us for more information.
Contact us for more information.
5X20 Single Pass Pet Food Dryer 2 TPH Capacity, Natural Gas 3M BTU
5X20 Single Pass Pet Food Dryer 2 TPH Capacity, Natural Gas 3M BTU
Learn More
new Fans
New 36" Paddle Fan
New 36″ Paddle Fan, 10HP to 75HP, Inlet Diameter 21″ OD, Outlet Area 2.41 S...
Learn More
new Pellet Testers
Sample Collector with Stand
Sample Collector with Stand, to Allow for Ease of Sample Procurement After Test
-Please...
Learn More
new Pellet Testers
2 Compartment Pellet Durability Index Tester, K-State Design
2 Compartment Pellet Durability Index Tester, K-State Design:
-1/6HP Gearmotor, 1 PH, 6...
Learn More
new Pellet Mills
NEW CA AUTOMATIC TUB LINE THREE PRESS STATIONS WITH MIXING /SCALING AND PRESSING WITH ROBOTIC STACKER 200 LB TUBS EVERY MIN. WITH MIN HOLD TIME
NEW CA AUTOMATIC TUB LINE THREE PRESS STATIONS WITH MIXING /SCALING AND PRESSING WITH R...
Learn More
new Hammer Mills
new Pellet Mills
Shaft for Century Conditioner
Shaft for Century Conditioner, Cast Stainless Steel Adjustable Picks, Stainless Steel S...
Learn More
new Pellet Mills
Feeder and Conditioner for Century Pellet Mill with Drives and Motors
Feeder and Conditioner for Century Pellet Mill with Drives and Motors, Includes Ceramic...
Learn More
new Pellet Testers
2 Compartment Pellet Durability Index Tester, K-State Design
2 Compartment Pellet Durability Index Tester, K-State Design with 1/6HP Gearmotor, 1PH,...
Learn More
new Pellet Testers
Brass 8" Test Sieve
Brass 8″ Test Sieve, NO. 3-1/2 with Brass Bottom Pan
Other Mesh Size Available Up...
Learn More
5 x 10 Single Deck Shaker
5 x 10 Single Deck Shaker, Parts Interchange with Rotex 81 Series
Learn More
new Magnets
Rare Earth Neodymium-Iron-Boron Magnet 18" Wide
Rare Earth Neodymium-Iron-Boron Magnet 18″ Wide, 1-1/4″ Thick x 9″ L ...
Learn More
new Extruders
Goyum 150 Expeller Press
Goyum 150 Expeller Press without Stack Cooker:
-Capacity: 15-20 Tons Per Day
-30HP, 3 P...
Learn More
new Coolers
Geelen Counter Flow Cooler
Geelen Counter Flow Cooler, 30 Tons Type VK 28 x 38KL, 10’4″ Wide x 14̵...
Learn More
new Coolers
2GA2 Vertical Pellet Cooler
2GA2 Vertical Pellet Cooler
-Dual Rotary Pocket Wheel Discharge with 1HP Gear Drive and...
Learn More
new Magnets
Magnet Rotary Bar Magnet Brand Eriez 12" Wide
Magnet Rotary Bar Magnet Brand Eriez 12″ Wide with 1/3HP Gearmotor
Learn More
new Hammer Mills
Hammer Mill Model CA-12
Hammer Mill Model CA-12
-12″ Wide Rotor with Fixed Hammers
-Inlet 8-1/4″ x ...
Learn More
new Extruders
Conex 5500, 4 Head Extruder
Conex 5500, 4 Head Extruder Set Up for Soy Bean-Top Feeder, Requires 125HP Motor-Not In...
Learn More
CA 12" Wide Belt x 9' Long Sewing Conveyor
CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive, Variable Speed...
Learn More
new Pellet Mills
NEW CA AUTOMATIC TUB LINE PLANT 100 TO 200 LB. TUBS AUTOMATIC CONTROLS WITH A MANUAL PALLET LOADING SINGLE LINE ONE TUB/ 3 MINS.
NEW CA AUTOMATIC TUB LINE PLANT 100 TO 200 LB. TUBS AUTOMATIC CONTROLS WITH A MANUAL PA...
Learn More
new Coolers
CA-2GA Vertical Cooler with Dual Rotary Pocket Discharge
CA-2GA Vertical Cooler with Dual Rotary Pocket Discharge, 1HP Gear Drive, Solido 500 Le...
Learn More
Disconnect, 100 AMP, 240V, Sylvania, NEMA 1 Indoor
Disconnect, 100 AMP, 240V, Sylvania, NEMA 1 Indoor
Learn More
7.5 HP 1765 RPM 213T FRAME SIEMENS 230/460 VOLTS NEW
7.5 HP 1765 RPM 213T FRAME SIEMENS 230/460 VOLTS NEW
Learn More
new Extruders
304 SS Preconditioner
304 SS Preconditioner:
-12″ x 6′ with 3HP Drive
-Fabricated 304SS Picks
-So...
Learn More
New CA High Speed Blender 16" Diameter X 5' Long with 20 HP Motor. Picks and Cleanout Door
New CA High Speed Blender 16″ Diameter X 5′ Long with 20 HP Motor. Picks an...
Learn More
new Pellet Testers
4 Compartment Pellet Durability Tester, K-State Design
4 Compartment Pellet Durability Tester, K-State Design with 1/6HP Gearmotor, 1PH, with ...
Learn More
new Magnets
Rare Earth Neodymium-Iron-Boron Magnet 12" Wide
Rare Earth Neodymium-Iron-Boron Magnet 12″ Wide, 1-1/4″ Thick x 9″ L ...
Learn More
22" x 22" Fike Explosion Vent
22″ x 22″ Fike Explosion Vent Model CV-S 1.5 PSTAT with Frame
Learn More
New CA 30 Feed Cleaner
New CA 30 Feed Cleaner 7.5 HP TEFC Motor Rated up to 30 TPH- Includes Screen of Choice-...
Learn More
new Pellet Mills
Century Quick Dump Bypass Chute, Stainless Steel
Century Quick Dump Bypass Chute, Stainless Steel Construction
Learn More
new Cyclone
New Cyclone 54" Diameter
New Cyclone 54″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
new Pellet Mills
Century Bull Gear and Pinion, 21 Tooth and 144 Tooth x 6.5" Wide
Century Bull Gear and Pinion, 21 Tooth and 144 Tooth x 6.5″ Wide
Learn More
new Magnets
Stainless Steel 10" x 7" x 2" Thick Plate Magnet
Stainless Steel 10″ x 7″ x 2″ Thick Plate Magnet, QTY: 12
Learn More
new Pellet Mills
Force Feeder for Century Pellet Mill
Force Feeder for Century Pellet Mill, Will Need Exact Dimensions From Discharge of Cond...
Learn More
new Pellet Mills
Cast Stainless Steel Pick Bars for 18" Diameter Conditioner
Cast Stainless Steel Pick Bars for 18″ Diameter Conditioner: Price/Ea
Learn More
new Pellet Testers
Custom Built Cage for Pellet Tester
Custom Built Cage for Pellet Tester, Metal Sides, Back and Top with Plexiglass, Hinged ...
Learn More
new Cyclone
New Cyclone 60" Diameter
New Cyclone 60″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
new Pumps
GORMAN RUPP PUMP MODEL 276B-98 SELF -PRIMING CENTRIFUGAL PUMP WATER 2 HP 3500 RPM 1 PH NEW
GORMAN RUPP PUMP MODEL 276B-98 SELF -PRIMING CENTRIFUGAL PUMP WATER 2 HP 3500 RPM 1 PH ...
Learn More
new Extruders
Conex 5000
Conex 5000, 3 Head Extruder Set Up for Soy Beans with 1HP Side Hopper Feeder Requires 7...
Learn More
new Cyclone
New Cyclone 36" Diameter
New Cyclone 36″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
new Cyclone
New Cyclone 84" Diameter
New Cyclone 84″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
new Cyclone
New Cyclone 96" Diameter
New Cyclone 96″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
new Coolers
2GA Vertical Pellet Cooler
2GA Vertical Pellet Cooler
-Dual Rotary Pocket Wheel Discharge with 1HP Gear Drive and ...
Learn More
new Coolers
2GA Vertical Cooler
New CA – 2GA Vertical Cooler with Dual Rotary Pocket Discharge, 1HP Gear Drive, BMRX-...
Learn More
CA 12" Wide Belt x 9' Long Sewing Conveyor
CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive Variable Speed,...
Learn More
new Magnets
Stainless Steel 16" x 7' x 2" Thick Plate Magnet
Stainless Steel 16″ x 7″ x 2″ Thick Plate Magnet
Learn More
new
New CA 100 Feed Cleaner
New CA 100 Feed Cleaner 25 HP TEFC Motor Rated up to 100 TPH Includes Screen of Choice-...
Learn More
Disconnect, 200 AMP, 240V, Westinghouse, JHFN 324
Disconnect, 200 AMP, 240V, Westinghouse, JHFN 324
Learn More
CA 12" Wide Belt x 9' Long Sewing Conveyor
CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive Variable Speed,...
Learn More
CA 12" Wide Belt x 9' Long Sewing Conveyor
CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive, Variable Speed...
Learn More
new Fans
New 29" Paddle Fan
New 29″ Paddle Fan, 10HP to 50HP, Inlet Diameter 17″ OD, Outlet Area 1.6 Sq...
Learn More
CA 730 FEED CLEANER WITH 7.5 HP MOTOR RATED UP TO 30 TONS /HR.
CA 730 FEED CLEANER WITH 7.5 HP MOTOR RATED UP TO 30 TONS /HR.
Learn More
CA 12" Wide Belt x 9' Long Sewing Conveyor
CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive, Variable Speed...
Learn More
CA 12" Wide Belt x 9' Long Sewing Conveyor
CA 12″ Wide Belt x 9′ Long Sewing Conveyor with 1/2HP Drive Variable Speed,...
Learn More
new Coolers
Custom Stand for 2GA2 Cooler
Custom Stand for 2GA2 Cooler, Allows for Clearance to Place Shaker Underneath, Standard...
Learn More
new Cooler Trays
Replacement Cooler Trays
Replacement Cooler Trays 304 Stainless Steel Construction for CPM Cooler, 1/8 Hole, 46%...
Learn More
20HP NAE 1800RPM Frame 256T 208-230/460 Volts
20HP NAE 1800RPM Frame 256T 208-230/460 Volts
Learn More
Union Special Portable Sewing Machine
Union Special Portable Sewing Machine, Model 4000B, 110 Volt
Learn More
new Pellet Mills
Set of Timken Main Bearings for SW 501H
Set of Timken Main Bearings for SW 501H Includes:
-Two Bearing Cup
-Two Bearing Cone
-T...
Learn More
1/2 HP 1725 RPM FRAME S56C 230/460 VOLTS PH. 3
1/2 HP 1725 RPM FRAME S56C 230/460 VOLTS PH. 3
Learn More
new Roller Mills
1.5HP NAE 1800RPM Frame 145T 208-230/460 Volts
1.5HP NAE 1800RPM Frame 145T 208-230/460 Volts
Learn More
Bulk Bag Unloader
Bulk Bag Unloader:
-3″ Tubular Steel Framework
-2 Ton Hoist
-Cantilever Rail Syst...
Learn More
new Cyclone
New Cyclone 30" Diameter
New Cyclone 30″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood ...
Learn More
new Pellet Mills
Procedure: Grind Front of Gear Box and Fabricate New Stainless Steel Wear Ring to Protect Against Future Wear
Procedure: Grind Front of Gear Box, Epoxy Front Plate with Devcon and Fabricate New Sta...
Learn More
new Fans
30" Diameter Fan Rotor (Impeller with Shaft)
30″ Diameter Fan Rotor (Impeller with Shaft) with Six Blades and 2-7/16″ Sh...
Learn More
Matcon Smart Drum Stainless Steel Tank 28" Diameter x 40" Tall
Matcon Smart Drum Stainless Steel Tank 28″ Diameter x 40″ Tall, Tank Only
Learn More
new Magnets
Stainless Steel 12" x 7" x 2" Thick Plate Magnet
Stainless Steel 12″ x 7″ x 2″ Thick Plate Magnet
Learn More
new Pellet Mills
Century Door, Mild Steel Construction with Stainless Liner
Century Door, Mild Steel Construction with Stainless Liner:
-2 Knife Posts with HD Spri...
Learn More
new Coolers
Stainless Steel Mesh Screen Material for 2GA Cooler
Stainless Steel Mesh Screen Material for 2GA Style Vertical Cooler, Coverage for One Pa...
Learn More
30HP NAE 1800RPM Frame 286T 208-230/460 Volts
30HP NAE 1800RPM Frame 286T 208-230/460 Volts
Learn More
new Cyclone
New Cyclone 48" Diameter
New Cyclone 48″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
100HP NAE 900RPM Frame 445T 208-230/460 Volts
100HP NAE 900RPM Frame 445T 208-230/460 Volts
Learn More
Stainless Steel Dryer Pans 5' Wide x 6" Pitch
Stainless Steel Dryer Pans 5′ Wide x 6″ Pitch 5/32 Hole 46% Open
Learn More
new Magnets
Stainless Steel 14" x 7" x 2" Thick Plate Magnet
Stainless Steel 14″ x 7″ x 2″ Thick Plate Magnet, QTY: 1
Learn More
new Pellet Mills
new Coolers
Inside Screen Panel for 2GA2 Cooler
Inside Screen Panel for 2GA2 Cooler, Stainless Steel, Bolt on Style with Stainless Mesh...
Learn More
new Coolers
Pocket Discharge Paddle Wheel for 2GA-2GA4 Style Cooler
Pocket Discharge Paddle Wheel for 2GA-2GA4 Style Cooler, 2 Unites Required Per Cooler w...
Learn More
TLV Cospect Model COS16 3/4"
TLV Cospect Model COS16 3/4″ Three-In-One Pressure Regulator, Separator, and St...
Learn More
new Magnets
Rare Earth Neodymium-Iron-Boron Magnet 16" Wide
Rare Earth Neodymium-Iron-Boron Magnet 16″ Wide, 1-1/4″ Thick x 9″ L ...
Learn More
new Pellet Mills
Bypass Quick Dump Feed Chute for Century Pellet Mill
Bypass Quick Dump Feed Chute for Century Pellet Mill
Learn More
Cardinal Load Cells Model AG18K-4AGBAR Scale Kit
Cardinal Load Cells Model AG18K-4AGBAR Scale Kit, 72,000 Lbs/Hr, Cap for 4 Cells with W...
Learn More
75HP Soft Starter Package - NEMA 4/12 - Circuit Breaker Disconnect Door Mounted Keypad HOA, and By-Pass Elector Switch Integral Start Duty By-Pass
75HP Soft Starter Package – NEMA 4/12 – Circuit Breaker Disconnect Door Mou...
Learn More
50HP NAE 1200RPM Frame 365T 208-230/460 Volts
50HP NAE 1200RPM Frame 365T 208-230/460 Volts
Learn More
new Extruders
Conex 30" Diameter 304SS Hopper Tank
Conex 30″ Diameter 304SS Hopper Tank:
-Feeder: 5″ 304SS Feed Screw with 3HP...
Learn More
50HP NAE 1800RPM Frame 326T 208-230/460 Volts
50HP NAE 1800RPM Frame 326T 208-230/460 Volts
Learn More
GREAT WESTERN TRU-BALANCE SIFTER TB MODEL 711M/6 6 DECKS 34X34
GREAT WESTERN TRU-BALANCE SIFTER TB MODEL 711M/6 6 DECKS 34X34
Learn More
new Dies
1/4" x 3 x 1-7/8" Effective 21V
1/4″ x 3 x 1-7/8″ Effective 21V with Tapered Relief for Tapered Wear Rings,...
Learn More
new Pellet Mills
new Pellet Mills
Century Roll Shell Assembly-Closed End Corrugated
Century Roll Shell Assembly-Closed End Corrugated, Price/Ea- 2 Required Per Mill
Learn More
new Pellet Mills
Century Roll Shell Seal
Century Roll Shell Seal, Seal Only, Price/Ea-2 Required Per Assembly, 4 Per Mill
Learn More
High Speed Blender 16" Diameter x 5' Long
High Speed Blender 16″ Diameter x 5′ Long with 20HP Motor Picks and Cleanou...
Learn More
49" x 90" Storveyor Stainless Steel Conveyor
49″ x 90″ Storveyor Stainless Steel Conveyor with Twin Pile Breakers and Di...
Learn More
new Pellet Mills
Feeder and Conditioner For 3022 18" x 104"
Feeder and Conditioner For 3022 18″ x 104″, C/W Die Hoist
-2 Liquid Additio...
Learn More
new Pellet Mills
new Extruders
INSTA -PRO MODEL 9400 EXTRUDER RECONDITIONED 6000TO 8000 LBS. /HR. SOYBEANS WITH 350 HP MAIN MOTOR SIDE FEEDER 133"X130"X72" TALL 16,480 LBS.
INSTA -PRO MODEL 9400 EXTRUDER RECONDITIONED
6000TO 8000 LBS. /HR. SOYBEANS WITH 350 HP...
Learn More
40HP NAE 1800RPM Frame 324T 208-230/460 Volts
40HP NAE 1800RPM Frame 324T 208-230/460 Volts
Learn More
new Pellet Mills
Mount Motor On Century Pellet Mill
Mount Motor On Century Pellet Mill Includes:
-Paraflex PX140 Coupling with Element
-Lab...
Learn More
3 HP 1800 RPM FRAME 182TC VOLTS 230/460 NORTH AMERICAN
3 HP 1800 RPM FRAME 182TC VOLTS 230/460 NORTH AMERICAN
Learn More
New Surge Hopper-Mild Steel-6' x 6' with 45 Degree Hopper-Mates to Pellet Mill Feeder
New Surge Hopper-Mild Steel-6′ x 6′ with 45 Degree Hopper-Mates to Pellet M...
Learn More
Disconnect, 100 AMP, 240V, I-T-E, Type 1 Indoor, Siemens
Disconnect, 100 AMP, 240V, I-T-E, Type 1 Indoor, Siemens
Learn More
new Pellet Mills
7.5HP NAE 1800RPM Frame 213T 208-230/460 Volts
7.5HP NAE 1800RPM Frame 213T 208-230/460 Volts
Learn More
15HP NAE 3600RPM Frame 254T 208-230/460 Volts Explosion Proof
15HP NAE 3600RPM Frame 254T 208-230/460 Volts Explosion Proof
Learn More
new Pellet Mills
new Pellet Mills
Stainless Steel Dual Drive Feeder with Conditioner
Stainless Steel Dual Drive Feeder with Conditioner with Integral Steam Manifold, with M...
Learn More
new Magnets
Stainless Steel 20" x 7" x 2" Thick Plate Magnet
Stainless Steel 20″ x 7″ x 2″ Thick Plate Magnet
Learn More
new Coolers
Stainless Steel Outside Louver Panel for 2GA2 Cooler
Stainless Steel Outside Louver Panel for 2GA2 Cooler, 304 Stainless Steel, Bolt on Style
Learn More
60HP NAE 1800RPM Frame 364T 208-230/460 Volts Explosion Proof
60HP NAE 1800RPM Frame 364T 208-230/460 Volts Explosion Proof
Learn More
new Coolers
Add-On For Linear Actuator Discharge
Add-On For Linear Actuator Discharge, Allows for Infinitely Adjustable Opening Size
-Gi...
Learn More
CA Sewing Machine Pedestal with 1/2HP, 1 PH Motor/Micro Switch Control
CA Sewing Machine Pedestal with 1/2HP, 1 PH Motor/Micro Switch Control
Learn More
new Fans
New 19-1/8" Paddle Fan
New 19-1/8″ Paddle Fan, 2HP to 25HP, Inlet Diameter 11″ OD, Outlet Area 0.6...
Learn More
new Fans
New 26" Paddle Fan
New 26″ Paddle Fan, 3Hp to 40Hp, Inlet Diameter 15″ OD, Outlet Area 1.24 Sq...
Learn More
new Hammer Mills
Rotor for Jacobson/Carter Day P-241 Hammer Mill
Rotor for Jacobson/Carter Day P-241 Hammer Mill
Learn More
new Ribbon Mixers
new Hammer Mills
Rotor for Jacobson/Carter Day P-240 Hammer Mill
Rotor for Jacobson/Carter Day P-240 Hammer Mill
Learn More
20HP NAE 1200RPM Frame 286T 208-230/460 Volts
20HP NAE 1200RPM Frame 286T 208-230/460 Volts
Learn More
new Extruders
Airlift System for Conex 5500 Extruder
Airlift System for Conex 5500 Extruder
-36″ 304SS Cyclone
-304SS Fan with Motor
-...
Learn More
new Pellet Mills
new Pellet Mills
Century Die Clamp Assembly with Bolts and Hardware
Century Die Clamp Assembly with Bolts and Hardware
Learn More
new Magnets
new Pellet Mills
Set of Roll Shell Bearings for 501-H Price/Ea Roller
Set of Roll Shell Bearings for 501-H Price/Ea Roller: 2 x Timken 749, 2 x Timken 742
Learn More
1/2HP NAE 1800RPM Frame 56C 208-230/460 Volts
1/2HP NAE 1800RPM Frame 56C 208-230/460 Volts
Learn More
new Magnets
14" x 7" x 32 MM Rare Earth Plate Magnet
14″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body
Learn More
new Pellet Mills
Fully Machined Round Stainless Shaft with Milled Flats to Accept Pick Bars
Fully Machined Round Stainless Shaft with Milled Flats to Accept Pick Bars
-Shaft OAL A...
Learn More
new Extruders
PLC Based Control Panel
Upgrade to PLC Based Control Panel Features:
-Auto Feeder Control Based on Main Ampload...
Learn More
new Magnets
10" x 7" x 32 MM Rare Earth Plate Magnet
10″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body
Learn More
2 HP 1725 RPM FRAME 56C 230/460 VOLTS POWER TECH NEW
2 HP 1725 RPM FRAME 56C 230/460 VOLTS POWER TECH NEW
Learn More
5,000 Lb NTEP 4' x 4' Platform Scale with Digital Indicator
5,000 Lb NTEP 4′ x 4′ Platform Scale with Digital Indicator
-Option 1: Ther...
Learn More
new Cyclone
New 17" Diameter Ductwork 90 Degree Elbow
New 17″ Diameter Ductwork 90 Degree Elbow 12GA Carbon Steel
Learn More
75HP NAE 1800RPM Frame 365T 208-230/460 Volts
75HP NAE 1800RPM Frame 365T 208-230/460 Volts
Learn More
1HP 3450 RPM Frame 56J 115/230 Volts
1HP 3450 RPM Frame 56J 115/230 Volts, 1 Phase, World Wide
Learn More
Matcon Smart Drum Stainless Steel with Controls
Matcon Smart Drum Stainless Steel with Controls with Bulk Discharge Center for Powders
Learn More
GWM-GG Wolverine Gross Weigh Mechanical Bagging Scale
GWM-GG Wolverine Gross Weigh Mechanical Bagging Scale
-Mild Steel Construction with Cam...
Learn More
new Extruders
new Pellet Mills
new Coolers
Product Discharge Unit for Bottom of 2GA-2GA4 Coolers
Product Discharge Unit for Bottom of 2GA-2GA4 Coolers Complete with:
-Dual Rotary Pocke...
Learn More
NEW PALLET WRAPPER WITH A 48" TURNTABLE AND MANUAL CONTROLS
NEW PALLET WRAPPER WITH A 48″ TURNTABLE AND MANUAL CONTROLS
Learn More
60HP NAE 1800RPM Frame 364T 208-230/460 Volts
60HP NAE 1800RPM Frame 364T 208-230/460 Volts
Learn More
Belt Feeder/Spreader for 58" Wide Tray
Belt Feeder/Spreader for 58″ Wide Tray Includes:
-Stand up to 72″ High (Cus...
Learn More
100HP NAE 1800RPM Frame 405T 208-230/460 Volts
100HP NAE 1800RPM Frame 405T 208-230/460 Volts
Learn More
new Cyclone
New Cyclone 72" Diameter
New Cyclone 72″ Diameter 12GA Mild Steel Left or Right Hand Available with Hood o...
Learn More
new Magnets
12" x 7" x 32 MM Rare Earth Plate Magnet
12″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body
Learn More
new Coolers
Custom Stand for Vertical Cooler
Custom Stand for Vertical Cooler, Allows for Clearance to Place Shaker Underneath
Learn More
new Extruders
Conex 5500, 5 Head Extruder
Conex 5500, 5 Head Extruder, Soybean Feeder, Requires 125HP Motor-Not Included
-4 Groov...
Learn More
new Coolers
Mild Steel Paddle Assembly for 2GA-2GA4 Cooler
Mild Steel Paddle Assembly for 2GA-2GA4 Cooler, 2 Required Per Unit, if Stainless Steel...
Learn More
new Cyclone
1/3 HP 1750 RPM 230/460 VOLTS FRAME 56C NEW NORTH AMERICAN
1/3 HP 1750 RPM 230/460 VOLTS FRAME 56C NEW NORTH AMERICAN
Learn More
new Coolers
Outside Louver Panel for 2GA2 Cooler
Outside Louver Panel for 2GA2- Mild Steel- Bolt on Style
Learn More
30HP NAE 3600RPM Frame 286TS 208-230/460 Volts Explosion Proof
30HP NAE 3600RPM Frame 286TS 208-230/460 Volts Explosion Proof
Learn More
new Cyclone
Stand for Cyclone with Integral Fan Mount
Stand for Cyclone with Integral Fan Mount
-Mild Steel Const.
-Mount Cyclone and Fan
-Tr...
Learn More
new Extruders
Control Panel for Extruder
Control Panel for Extruder, Includes Start-Stop Contractor for 125HP Main Motor, Start-...
Learn More
new Extruders
Conex 5500, 5 Head Extruder
Conex 5500, 5 Head Extruder Setup for Petfood/Aquaculture, Requires 125HP Motor-Not Inc...
Learn More
NEW PALLET WRAPPER WITH 48" TURNTABLE AND MANUAL CONTROLS 1 PH MOTORS
NEW PALLET WRAPPER WITH 48″ TURNTABLE AND MANUAL CONTROLS 1 PH MOTORS
Learn More
15HP NAE 1800RPM Frame 254T 208-230/460 Volts
15HP NAE 1800RPM Frame 254T 208-230/460 Volts
Learn More
#41 AAL/MS Screener 40 x 120
#41 AAL/MS Screener 40 x 120, 1 Deck, with 39 x 119 Screen on Top
Includes:
-Any Standa...
Learn More
10,000 Lb NTEP 4' x 4' Platform Scale with Digital Indicator
10,000 Lb NTEP 4′ x 4′ Platform Scale with Digital Indicator
-Option 1: The...
Learn More
Belt Feeder/Spreader for 58" Wide Tray
Belt Feeder/Spreader for 58″ Wide Tray Includes:
-Stand up to 72″ High
-Art...
Learn More
Cutter Head with Drive Assembly
Cutter Head with Drive Assembly:
-2HP Motor Drive with Stand Drive Shaft with Quick D...
Learn More
new Pellet Mills
75HP NAE 1200RPM Frame 405T 208-230/460 Volts
75HP NAE 1200RPM Frame 405T 208-230/460 Volts
Learn More
25HP NAE 1800RPM Frame 284T 208-230/460 Volts
25HP NAE 1800RPM Frame 284T 208-230/460 Volts
Learn More
new Pellet Mills
Shaft for CPM Century Conditioner with Stainless Steel Adjustable Picks
Shaft for CPM Century Conditioner with Stainless Steel Adjustable Picks, Heavy Wall Sta...
Learn More
new Paddle Mixers
New CA High Speed Molasses Mixer
New CA High Speed Molasses Mixer 16″ x 5′ with Picks and Cleanout Door
Learn More
new Magnets
Stainless Steel 8" x 7" x 2" Wide Plate Magnet
Stainless Steel 8″ x 7″ x 2″ Wide Plate Magnet
Learn More
new Extruders
Expeller Press
Expeller Press:
-Capacity: 1.5 MT/Hr,
-Shafts of AISI 4340 Material
-All Worms Hard Chr...
Learn More
new Magnets
16" x 7" x 32 MM Rare Earth Plate Magnet
16″ x 7″ x 32 MM Rare Earth Plate Magnet with Stainless Hinges, 304 SS Body
Learn More
CA High Speed Blender 16" Diameter x 5' Long
CA High Speed Blender 16″ Diameter x 5′ Long with Picks, Clean Out Door, an...
Learn More
new Extruders
6' Diameter x 12' Long Tumble Cooler
6′ Diameter x 12′ Long Tumble Cooler:
-Mild Steel Construction
-Bolt on Fli...
Learn More
new Pellet Mills
Set of Seals and Bearings for Century Pellet Mill
Set of Seals and Bearings for Century Pellet Mill
Learn More
new Extruders
Goyum 150 Expeller Press with Stack Cooker
Goyum 150 Expeller Press with Stack Cooker, Capacity: 15-20 Tons Per Day
Learn More
new Pellet Mills
Century Knife Post with Key
Century Knife Post with Key, Does Not Include Heat Treated Knife
Learn More
new Pellet Mills
Century Roll Shell-Closed End Corrugated
Century Roll Shell-Closed End Corrugated, Shell Only Not Assembly, Price/Ea.-2 Required...
Learn More
new Coolers
Estimated Time to Build Cooler
Estimated Time to Mock Up Placement, Test Fit, Fabricate Transition
-Actual Time and Ma...
Learn More
new Dies
Sprout Waldron 32" Wood Die
Sprout Waldron 32″ Wood Die, 108N Chrome Die, 1/4″ x 3 x 1-1/8″ TRVR,...
Learn More
30HP NAE 1200RPM Frame 326T 208-230/460 Volts
30HP NAE 1200RPM Frame 326T 208-230/460 Volts
Learn More
new Fans
New 15-5/8" Paddle Fan
New 15-5/8″ Paddle Fan, 1HP to 10HP, Inlet Diameter 9″OD, Outlet Area 0.5 S...
Learn More
new Pellet Mills
Century Heavy Duty Mainshaft Disc
Century Heavy Duty Mainshaft Disc, Disc Only Mainshaft Not Included
Learn More
new Hammer Mills
Hammer Mill Model CA-160
Hammer Mill Model CA-160
-HP Range of 5-15HP
-Available with 1800 or 3600 RPM Motor
&nb...
Learn More
